Your Basket 0 items.
Fireplace Surround Rebate
Understanding the fireplace rebate you require is essential in ensuring your fireplace/fire will fit your required application. The dimension you need to work out is the depth needed to fully recess you fire against your flat wall or in your chimney recess. If the fireplace is being fitted against a flat wall then the full depth of the fire needs to be recessed within the fire surround. However, if the fire surround is being fitted against a chimney then the depth of the fire can be recessed within the cavity of the chimney.
The rebate is the distance from the back of the wall to the front of the back panel. Deeper rebates allow the back panel to be brought forward, creating a void between the panel and the wall. Deep rebates are popular where inset electric fires, or flueless gas fires are to be installed onto flat walls.
To work out the fire recess, you subtract the rebate by 20mm to accommodate the thickness of the panel. Therefore 100mm rebate gives you 80mm fire recess depth (100mm - 20mm for the back panel).
The Flavel Windsor Contemporary High Efficiency Gas Fire has stunning styling to make it the centrepiece of your room. The Windsor gas fire comes with either a coal or driftwood fuel effect and a choice of brass or silver finishes.
The Flavel Windsor Contemporary high efficiency gas fire has a 3.2kW output and boasts 89% efficiency. The Windsor gas fire is suitable for Class 1 chimneys, Class 2 prefabricated and pre-cast flues.
- Heat output 3.2kW
- 89% efficiency
- Depth of 120mm inset
- Suitable for Class 1 chimneys, Class 2 prefabricated and pre-cast flues
- Brass or silver finish
- Available in coal or pebble fuel effect
Have a look at our Fireplace Help & Advice section.
|Heat Output (kW)||3kW|
If you are not sure what fire or fireplace you require please have a look at our Fire & Fireplace Help & Advice section.